• BLOG
  • CP-33 Looper

    CP-33 Looper


    Caline have a rich history of providing excellent value guitar pedals and now we have produced a great looper pedal. The pedal has a 10 minute loop time and an unlimited amount over overdubs. When the pedal is plugged in and connected pressing the foots witch once to begins recording the loop (the LED should go red). Pressing again to replays the loop (the LED should be blue at this point). You can then press the foot switch again, onto red mode, to record another layer of the loop, and again into blue mode to mark the end of the loop. You can do this as many times as you want adding layers to the track. Holding the foot switch when blue LED is lit clears the previous recording. When there is no light visible the looper has no loop stored. When the blue led is showing press the foot switch twice to pause the playback, and again to resume.



    1. Simple,easy-to-use looper pedal

    2. Unlimited overdubs

    3. Undo/redo function

    4. High quality recording and playback

    5. Power Requirement: 9V DC center negative (9V power supply or battery --not included)

    6. Current consumption: 135mA

    7. Product Dimensions: 11.2x6.4x3.4cm

    8. Weight:0.23kgs


    Packaging information:

    1. Dimensions of single box: 12.9x7.7x6cm

    2. QTY / CTN: 30PCS

    3. Dimensions of Carton:30.5x25x27.5cm

    4. Weight /CTN: 8kgs





    HOME    |    PRODUCTS    |    ARTISTS    |    DEALER    |    NEWS    |    CONTACT
    Copyright:2011 All Right Reserved by Caline Musical Instruments(Hong Kong)Limited