• HOME
  • ABOUT US
  • ARTISTS
  • DEALER
  • BLOG
  • CONTACT
  • CP-16 Distortion

    CP-16 Mark 4 Distormtion

    A great sounding distortion pedal which replicates that Mark 4 tone. The two gain controls control the high and low levels of distortion. You can also get a larger range of tones if you have a way to manipulate the mids (such as on your amp or EQ pedal). The pedal is durably constructed with its metal enclosure, is true bypass, and works off either a 9v battery or power supply. Note - if you're after that real Mark 4 sound this pedal should be used with a tube amp.

    Gain1" knob: use to increases treble distortion,and adjust to the former level of distortion.

    •"Gain2" knob:controls the amount of bass distortion, and adjust to the saturation level of distortion.

    •"LEVEL" knob£ºadjust the output level.

     

    Features:

    1. True bypass

    2. Power Requirement: 9V DC center negative

    3. Current consumption: 30mA

    4. Product Dimensions: 11.2x6.4x3.4cm

    5. Weight:0.23kgs

     

    Packaging information:

    1. Dimensions of single box: 12.9x7.7x6cm

    2. QTY / CTN: 30PCS

    3. Dimensions of Carton:30.5x25x27.5cm

    4. Weight /CTN: 8kgs

     

    Videos:

    https://www.youtube.com/watch?v=aMGtLo5haX0

    https://www.youtube.com/watch?v=bNkv9mKPXgw

    CALINEMUSIC
    E-mail:info@calinemusic.com
    +86-755-29365691




    HOME    |    PRODUCTS    |    ARTISTS    |    DEALER    |    NEWS    |    CONTACT
    Copyright:2011 All Right Reserved by Caline Musical Instruments(Hong Kong)Limited